Navigation display does not close
- Check the CD door. Look for foreign objects, stuck CD, broken or sticking door.
Is the CD door OK?
YES -Go to step 2.
NO -Repair/replace the audio disc changer. ■
- Remove the audio disc changer (see AUDIO DISC CHANGER REMOVAL/INSTALLATION
). Check the voltage on the navigation display unit connector B (10P) terminal No. 10 and body ground.Fig 1: Checking Voltage On The Navigation Display Unit Connector B (10P) Terminal No. 10 And Body Ground
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there about 3.0 V?
YES -Check the connections on connector B (10P) terminal No. 10 at the navigation display unit. If OK, substitute a known-good navigation display unit (see NAVIGATION DISPLAY UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the navigation display unit (see NAVIGATION DISPLAY UNIT REMOVAL/INSTALLATION ).
NO -Go to step 3.
- Disconnect navigation display unit connector B (10P) and audio disc changer connector A (18P). Check for continuity to body ground on terminal No. 4 of the audio disc changer connector A (18P).Fig 2: Checking For Continuity To Body Ground On Terminal No. 4 Of The Audio Disc Changer Connector A (18P).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
YES -Repair short in the wire between the navigation display unit and the audio disc changer. ■
NO -Replace the audio disc changer (see AUDIO DISC CHANGER REMOVAL/INSTALLATION ). ■