Selector Control Shaft Bearing Replacement

Special Tools Required 

• Remover Shaft, 10 mm 07936-GE00100
• Remover Head, 10 mm 07936-GE00200
• Weight, Remover 07741 -0010201
• Driver Handle, 15 x 135L 07749-0010000
• Attachment, 22 x 24 mm 07746-0010800

1. Remove the control shaft bearing from the transmission housing using the remover head (10 mm), the remover shaft (10 mm), and the remover weight.
   Fig 1: Removing Control Shaft Bearing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new bearing until it bottoms in the transmission housing using the driver handle (15 x 135L) and the attachment (22 x 24 mm).

Fig 2: Installing Control Shaft Bearing

Courtesy of AMERICAN HONDA MOTOR CO., INC.