LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RT >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist) System >> Yaw Rate-Lateral Acceleration Sensor Replacement

Yaw Rate-Lateral Acceleration Sensor Replacement

NOTE:
  • Do not damage or drop the sensor as it is sensitive.
  • Do not use power tools.
  1. Turn the ignition switch to LOCK (0).
  2. Remove the rear console trim (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  3. Disconnect the yaw rate-lateral acceleration sensor 4P connector (A).
    Fig 1: Yaw Rate-Lateral Acceleration Sensor 4P Connector And Yaw Rate-Lateral Acceleration Sensor With Torque Specifications
    G05965480Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the sensor mounting bolts, then remove the yaw rate-lateral acceleration sensor (B).
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals