LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RT >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist) System >> Steering Angle Sensor Replacement

Steering Angle Sensor Replacement

NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.
  1. Make sure the ignition switch is in LOCK (0).
  2. With the wheels in the straight-ahead position and the steering wheel centered, remove the steering wheel (see STEERING WHEEL REMOVAL ), and steering column cover (see step 5 on REMOVAL ).
  3. Remove the cable reel (see CABLE REEL REPLACEMENT ) and the combination switch assembly (see step 7 on REMOVAL ).
  4. Remove the wiper/turn switch (A).
    Fig 1: Identifying Wiper/Turn Switch And Combination Switch Body Assembly
    G05965478Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Replace the combination switch body assembly (B).
  6. Install the combination switch in the reverse order of removal.
    NOTE:
    • Do not remove the steering angle sensor from the combination switch body.
    • When installing the cable reel, set the turn signal canceling sleeve position (see CABLE REEL REPLACEMENT ).
  7. Do the steering angle sensor center point writing (see STEERING ANGLE SENSOR CENTER POINT WRITING ).
scientia non olet · About LEMON Manuals