Seat Belts: Inspection: Retractor

Before installing the retractor, check that the seat belt can be pulled out freely.
Make sure that the seat belt does not lock when the retractor (A) is leaned slowly up to 15 ° from the mounted position. The seat belt should lock when the retractor is leaned over 40 °. Do not attempt to disassemble the retractor.
Front

Fig 1: Retractor Positioning Diagram (Front)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Second row

Fig 2: Retractor Positioning Diagram (Second Row)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Third row

Fig 3: Retractor Positioning Diagram (Third Row)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Second row center/Third row center

Fig 4: Retractor Positioning Diagram (Second Row Center/Third Row Center)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Replace the seat belt with a new assembly if there is any abnormality. Do not disassemble any part of the seat belt for any reason.