LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Odyssey EX >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Block >> Piston, Pin, and Connecting Rod Replacement >> Reassembly

Piston, Pin, and Connecting Rod Replacement: Reassembly

  1. Install a piston pin snap ring (A) only on one side.
    Fig 1: Installing Piston Pin Snap Ring
    G06966468Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Coat the piston pin bore in the piston, the bore in the connecting rod, and the piston pin with new engine oil.
  3. Heat the piston to about 158°F (70°C).
    Fig 2: Heating Piston To About 158°
    G06966469Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Assemble the piston (A) and the connecting rod (B) with the embossed marks (C) on the same side. Install the piston pin (D).
    NOTE: Apply new engine oil to the piston pin.
    Fig 3: Identifying Embossed Marks On Piston And Connecting Rod
    G06966470Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the remaining snap ring.
  6. Reassemble the other pistons the same way.
scientia non olet · About LEMON Manuals