Special Tools Required

Relay Puller 07AAC-000A2A1 or 07AAC-000A1 A0

Use this chart to identify the type of relay, then do the test listed for it.

RELAY REFERENCE CHART

Relay

Test

Active control engine mount (ACM) control relay"

Normally-open four-terminal type

A/C condenser fan relay⁽¹⁾

A/C compressor clutch relay⁽¹⁾

Cargo area accessory power socket relay⁽¹⁾

Electronic throttle control system (ETCS) control relay⁽¹⁾

Front lower accessory power socket relay⁽¹⁾ (except LX)

Front upper accessory power socket relay⁽¹⁾

Fog light relay⁽¹⁾ (with fog light)

Front blower motor relay⁽¹⁾

Headlight low relay⁽¹⁾

Horn relay⁽¹⁾

Ignition coil relay⁽¹⁾

Interior lights cut relay⁽¹⁾

PGM-FI main relay 1⁽¹⁾

PGM-FI main relay 2⁽¹⁾

PGM-FI sub relay⁽¹⁾

Radiator fan relay⁽¹⁾

Right rear power window relay⁽¹⁾

Rear blower motor relay⁽¹⁾

Rear window defogger relay⁽¹⁾

Seat heater relay⁽¹⁾ (with seat heater)

Starter cut relay 1⁽¹⁾

Starter cut relay 2⁽¹⁾

Taillight relay⁽¹⁾

Wiper main relay⁽¹⁾

ACC cut relay⁽¹⁾

Five-terminal type

IG2 cut relay⁽¹⁾

Fan control relay⁽¹⁾

⁽¹⁾	Carefully remove the relay from the fuse/relay box using the relay puller. Do not use pliers. Pliers will damage the relay.

Fig 1: Removing Relay Using Relay Puller

Courtesy of AMERICAN HONDA MOTOR CO., INC.