DTC B2002: Left Power Slide Door Control Unit Internal Error (EEPROM Error)
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see
TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Disconnect the battery terminal, and then reconnect (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
- Turn the ignition switch to LOCK (0), and then back to ON (II).
- Check for DTCs with the HDS.
Is DTC B2002 indicated?
YES -Replace the left power sliding door control unit (see POWER SLIDING DOOR MOTOR UNIT REPLACEMENT ).
NO -Intermittent failure, the left power sliding door control unit is OK at this time.