A/F Sensor (Bank 2)

DTC P0154: Monitor ID $05: Test ID $80

OBD Monitor ID	$05	Test ID	$80	Unit and Scaling ID	$11
DTC		P0154
Test Description		Check of A/F sensor "non-activation" by monitoring the sensor non-activation time.
Store Timing		Normal judgment/Failure judgment
Conversion to Engineering Units		Measured value: Output value (Decimal) x 0.1 (sec.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.1 (sec.)

DTC P0154: Monitor ID $05: Test ID $82

OBD Monitor ID	$05	Test ID	$82	Unit and Scaling ID	$0B
DTC		P0154
Test Description		Check of A/F sensor "non-activation" by monitoring the sensor cell voltage.
Store Timing		Failure judgment
Conversion to Engineering Units		Measured value: Output value (Decimal) x 0.01 (V) The lowest limit value: Output value (Decimal) x 0.01 (V) The highest limit value: Output value (Decimal) x 0.01 (V)

DTC P2197: Monitor ID $05: Test ID $8D

OBD Monitor ID	$05	Test ID	$83	Unit and Scaling ID	$8D
DTC		P2197
Test Description		Check of the A/F sensor "too lean" by monitoring the A/F sensor signal.
Store Timing		Normal judgment/Failure judgment
Conversion to Engineering Units		Measured value: Output value (Decimal) x 0.003906 (mA) The lowest limit value: Output value (Decimal) x 0.003906 (mA) The highest limit value: Not applicable

DTC P2A03: Monitor ID $05: Test ID $84

OBD Monitor ID	$05	Test ID	$84	Unit and Scaling ID	$8D
DTC		P2A03
Test Description		Check of A/F sensor rationality by monitoring the sensor signal during fuel cut condition.
Store Timing		Normal judgment/Failure judgment
Conversion to Engineering Units		Measured value: Output value (Decimal) x 0.003906 (mA) The lowest limit value: Output value (Decimal) x 0.003906 (mA) The highest limit value: Output value (Decimal) x 0.003906 (mA)

DTC P0153: Monitor ID $05: Test ID $85

OBD Monitor ID	$05	Test ID	$85	Unit and Scaling ID	$01
DTC		P0153
Test Description		Response check of A/F sensor by monitoring the amplitude of filtered sensor signal during stable driving condition.
Store Timing		Normal judgment/Failure judgment
Conversion to Engineering Units		Measured value: No unit The lowest limit value: No unit The highest limit value: Not applicable

DTC P1174: Monitor ID $05: Test ID $86

OBD Monitor ID	$05	Test ID	$86	Unit and Scaling ID	$8D
DTC		P1174
Test Description		Check of A/F sensor "out of range" by monitoring the sensor signal.
Store Timing		Normal judgment/Failure judgment
Conversion to Engineering Units		Measured value: Output value (Decimal) x 0.003906 (mA) The lowest limit value: Output value (Decimal) x 0.003906 (mA) The highest limit value: Not applicable

DTC P0154: Monitor ID $05: Test ID $87

OBD Monitor ID	$05	Test ID	$87	Unit and Scaling ID	$14
DTC		P0154
Test Description		Check of A/F sensor "non-activation" by monitoring the sensor element resistance during A/F feedback control.
Store Timing		Failure judgment
Conversion to Engineering Units		Measured value: Output value (Decimal) x 1 (W) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1 (W)

DTC P0154: Monitor ID $05: Test ID $88

OBD Monitor ID	$05	Test ID	$88	Unit and Scaling ID	$0B
DTC		P0154
Test Description		Check of A/F sensor "non-activation" by monitoring the sensor cell voltage during A/F feedback control.
Store Timing		Failure judgment
Conversion to Engineering Units		Measured value: Output value (Decimal) x 0.01 (V) The lowest limit value: Output value (Decimal) x 0.01 (V) The highest limit value: Output value (Decimal) x 0.01 (V)