LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Insight Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> SRS Unit Replacement >> Removal

SRS Unit Replacement: Removal

  1. Do the 12 volt battery terminal disconnection procedure (see USING THE GR8 BATTERY DIAGNOSTIC STATION ), then wait at least 3 minutes before starting work.
  2. Remove the center console (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  3. Remove the heater joint duct (see step 7 DASHBOARD/STEERING HANGER BEAM REMOVAL/INSTALLATION ).
  4. Disconnect SRS unit connectors (A) from the SRS unit.
    NOTE: The SRS unit connectors have lever locks. Release the locks before disconnecting the connectors (see LEVER-LOCKED CONNECTOR ).
    Fig 1: Identifying SRS Unit Connectors And Torx Bolts
    G08095566Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the TORX bolts (B) using a TORX T30 bit, then pull out the SRS unit.
scientia non olet · About LEMON Manuals