Side Defogger Vent Trim Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

Take care not to scratch the dashboard and its related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
The left side defogger trim is shown; the right side defogger trim is similar.

Insert the appropriate trim tool in the gap between the side defogger vent trim (A) and the dashboard, and detach the hooks (B), then remove the trim.
NOTE: Apply protective tape (C) to the body as shown.

Fig 1: Identifying Side Defogger Vent Trim And Dashboard
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and push the hooks into place securely.