Dashboard Vent Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

NOTE: Take care not to scratch the dashboard and its related parts.

Remove the glove box (see GLOVE BOX REMOVAL/INSTALLATION ).
Remove the screws, then pull back the dashboard duct (A). Inside dashboard vent
Inside dashboard vent

Fig 1: Identifying Dashboard Duct And Screws (Inside Dashboard Vent)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Identifying Dashboard Duct And Screws (Outside Dashboard Vent)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the dashboard vent (B).
Install the dashboard vent in the reverse order of removal.