Fuel Fill Pipe Removal/Installation

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Drain the fuel tank until it is less than half full (see FUEL TANK DRAINING ).
Remove the fuel fill cap.
Raise the vehicle on a lift.
Remove the left rear wheel.
Remove the fuel fill pipe cover (A).

Fig 1: Identifying Fuel Fill Pipe Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the quick-connect fittings (A).

Fig 2: Quick-Connect Fittings, Fuel Fill Pipe And Bolt With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the fuel fill pipe (B).
Disconnect the quick-connect fittings (C).
Remove the clip (D) from the fuel fill pipe.
Install the parts in the reverse order of removal.