LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Insight Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Radiator Cap Test

Radiator Cap Test

  1. Wait until the engine is cool, then carefully remove the radiator cap (A). Wet the radiator cap seal with engine coolant, then install it on a commercially available pressure tester (B).
    Fig 1: Checking Radiator Cap
    G08092071Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Apply a pressure of 93-123 kPa (0.95-1.25 kgf/cm2 , 13.5-17.8 psi).
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the radiator cap.
scientia non olet · About LEMON Manuals