Side Defogger Vent Trim Removal/Installation

Special Tools Required

KTC Trim Tool Set SOJATP2014*

*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

Take care not to scratch the dashboard or the related parts.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
The left side defogger trim is shown; the right side defogger trim is similar.

Insert the appropriate trim tool in the gap between the side defogger vent trim (A) and the dashboard, and detach the hooks (B), then remove the trim.
NOTE: Apply protective tape (C) to the body as shown.

Fig 1: Inserting Trim Tool In Gap Between Side Defogger Vent Trim And Dashboard
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the trim in the reverse order of removal, and push the hooks into place securely.