Rearview Camera Removal/Installation

Remove the hatch lower trim panel (see TRIM REMOVAL/INSTALLATION - HATCH AREAS ).
Remove the rear licence trim (see REAR LICENSE TRIM REPLACEMENT ).
Disconnect the connector (A), then remove the wire harness clip (B).

Fig 1: Identifying Connector And Wire Harness Clip
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pushing the tab (A), and remove the rearview camera (B).

Fig 2: Identifying Tab And Rearview Camera
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the rearview camera in the reverse order of removal.