USB Adapter Control Unit Connector A (14P)

Fig 1: Identifying USB Adapter Control Unit Connector A (14P)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Cavity	Wire Color	Terminal Name	Description
A1	ORN	+ B	Continuous power source for USB adapter control unit
A2	BLU	SYS ON	Inputs signal for USB adapter control unit switching ON/OFF
A3	GRY(1)	GA-NET BUS SH	Shield for terminals No. 9 and No. 10
A4	GRY(1)	AUDIO SH	Shield for terminals No. 5, No. 6, No. 13, and No. 14
A5	BLK	AUDIO R +	Outputs sound signal
A6	WHT	AUDIO L+	Outputs sound signal
A9	YEL	GA-NET BUS +	GA-Net bus communication signal
A10	BRN	GA-NET BUS-	GA-Net bus communication signal
A11	BLK	GND	Ground for USB adapter control unit
A13	RED	AUDIO R-	Outputs sound signal
A14	GRN	AUDIO L-	Outputs sound signal
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.