DTC 2702: GPS Diag: Receiver in Navi ECU

WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Check the vehicle battery condition first.
Before you troubleshoot, make sure to follow GENERAL TROUBLESHOOTING INFORMATION .
Make sure the vehicle is parked outside, away from buildings.
Check for electronic aftermarket accessories (possibly hidden) mounted near the GPS antenna or the audio-navigation unit.
Check for aftermarket metallic window tint.

Clear the hard error code (see HOW TO CLEAR ERROR HISTORY ).
Turn the ignition switch to LOCK (0), and then back to ON (II).
Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis items menu (see SYSTEM DIAGNOSTIC MODE ).
Select the System Links.
Is the GPS Ant icon red?

YES - Go to step 5.

NO - Intermittent failure; the system is OK at this time. Check for loose connections at audio-navigation unit connector H (2P).
Select the GPS Ant icon.
Is Receiver in Navi ECU OK indicated?

YES - Intermittent failure, the system is OK at this time. If the unit repeatedly comes back with the DTC, replace the audio-navigation unit.

NO - Replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).