DTC 2605: H/U Diag Connect
WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the vehicle battery condition first.
- Before you troubleshoot, make sure to follow GENERAL TROUBLESHOOTING INFORMATION .
- Clear the hard error code (see HOW TO CLEAR ERROR HISTORY ).
- Turn the ignition switch to LOCK (0), and then back ON (II).
- Check the Error History (see How to Check Error History
).
Is Hard Error 2601 indicated?
YES - Do the 2601 troubleshooting.
NO - Go to step 4.
- Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu (see SYSTEM DIAGNOSTIC MODE ).
- Select the System Links.
Is the Radio icon red?
YES - Replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
NO - Intermittent failure, the system is OK at this time.