LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Fit Base, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Under-Dash Fuse/Relay Box >> Under-Dash Fuse/Relay Box - Removal and Installation >> USA Models >> Installation

USA Models: Installation

  1. Install the relays and connect the connectors to the under-dash fuse/relay box, then install the under-dash fuse/relay box in the reverse order of removal.
  2. Install the removed parts in the reverse order of removal.
  3. Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
  4. If the under-dash fuse/relay box is being replaced, do the following with the HDS.
    1. Have all registered keys and the ECM/PCM code.
    2. Connect the HDS to the data link connector (DLC).
    3. Turn the ignition switch to ON (ll).
    4. Select IMMOBI from the System Selection Menu, then select IMMOBILIZER SETUP.
    5. Select REPLACE MPCS/MICU/IMOES.
    6. Do the registration according to the instructions on the HDS screen.
  5. Confirm that all systems work properly.
scientia non olet · About LEMON Manuals