Brake System Inspection and Test: Notes

Inspect the brake system components listed. Repair or replace any parts that are leaking or damaged. Component Inspections:

BRAKE SYSTEM INSPECTION AND TEST REFERENCE TABLE

Component	Procedure	Also check for
Master Cylinder	Look for damage or signs of fluid leakage at: Reservoir, subreservoir or master cylinder body. Lines, reservoir hose and grommets, and their joints. Between master cylinder and booster.	Bulging seal at reservoir cap. This is a sign of fluid contamination.
Brake Hoses	Look for damage or signs of fluid leakage at: Line joints and banjo bolt connections. Hoses and lines, also inspect for twisting or damage.	Bulging, twisted, or bent lines.
Caliper	Look for damage or signs of fluid leakage at: Piston seal. Banjo bolt connections. Bleed screw.	Seized or sticking caliper pins.
Wheel Cylinder	Look for damage or signs of fluid leakage at: Wheel cylinder. Line joints. Bleed screw.	-
ABS or VSA Modulator-control Unit	Look for damage or signs of fluid leakage at: Line joints. Modulator-control unit.	-