LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> CR-Z Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Radiator Cap Test

Radiator Cap Test

  1. Wait until the engine is cool, then carefully remove the radiator cap (A), Wet the radiator cap seal with engine coolant, then install it on a commercially available pressure tester (B).
    Fig 1: Applying Pressure On Pressure Tester Attached To Radiator Cap Seal
    G06949636Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Apply a pressure of 93.3-122.7 kPa (0.951-1.251 kgf/cm2 , 13.53-17, 80 psi).
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the radiator cap.
scientia non olet · About LEMON Manuals