Console Armrest Removal/Installation

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the Honda Tool and Equipment Program; call 888-424-6857

NOTE:

Take care not to scratch the console.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

Remove the center console trim (see step 2 on CENTER CONSOLE REMOVAL/INSTALLATION ).
Remove the TORX screws with a TORX T20 bit, release the hooks (A, B), then remove the armrest (C).

Fig 1: Identifying Armrest And Hooks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the armrest in the reverse order of removal, and push the hooks into place securely.