LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Pilot EX, 3.5 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Charging System) >> Alternator Removal and Installation >> Installation

Alternator Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the alternator, then tighten the mounting bolt (A) and the alternator bracket mounting bolt (B).
    Fig 1: Tightening Alternator Bracket Mounting Bolt With Torque Specifications
    G05963895Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Connect the alternator connector (A), then install the BLK wire (B) to the alternator. Make sure the crimped side of the ring terminal faces away from the alternator when you connect it.
    Fig 2: Alternator Connector And BLK Wire With Bolt With Torque Specifications
    G05963896Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the bolt (C) securing the harness bracket.
  4. Install the drive belt (see DRIVE BELT REPLACEMENT ).
  5. Install the engine cover.
  6. Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
scientia non olet · About LEMON Manuals