Receiver/Dryer Desiccant Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2014 Honda Ridgeline, 2013 Honda Ridgeline, 2012 Honda Ridgeline, 2011 Honda Ridgeline, and 2010 Honda Ridgeline. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air.

Remove the A/C condenser (see A/C CONDENSER REPLACEMENT ).
Remove the cap (A) from the bottom of the A/C condenser. Remove the O-ring (B) and the desiccant (C).

Fig 1: A/C Condenser, O-Ring And Cap With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the receiver/dryer in the reverse order of removal, and note these items:
- Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (DENSO ND-OIL 8) before installing them. Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage.
- Install the cap to the specified torque. Excessive torque can damage the plastic cap or its threads.