Security Indicator Does Not Work Properly
NOTE:
- The system will not operate without the 5-digit security (anti-theft) code.
- Before troubleshooting, make sure you have the 5-digit security code entered.
- Turn the ignition switch to ON (II).
- Turn on the audio unit, and check the audio system in all modes (AM, FM, CD, XM, etc.).
Does the audio system operate normally?
YES - Go to step 3.
NO - Troubleshoot the audio system. ■
- Turn the ignition switch to LOCK (0).
Is the security indicator (LED) light on (blinking)?
YES - Go to Step 4.
NO - Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio unit. ■
- Turn the ignition switch to ON (II).
- Turn on the audio system.
Is the security indicator (LED) light out (not blinking)?
YES - The audio unit is OK at this time. Check for loose or poor connections at audio unit. ■
NO - Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio unit. ■