Audio Remote Switch Test

SRS components are located in this area. Review the SRS COMPONENT LOCATION INDEX and PRECAUTIONS AND PROCEDURES before doing repairs or service.

1. Remove the steering wheel (see STEERING WHEEL REMOVAL ).
2. Remove the audio remote switch (see STEERING WHEEL DISASSEMBLY/REASSEMBLY ).
   Fig 1: Identifying Audio Remote Switch Connector Terminal

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Measure the resistance between terminals No. 1 and No. 8 in each switch position according to the table below.
   RESISTANCE REFERENCE TABLE
   
   

   Position	Resistance
   No button pressed	About 10 kΩ
   MODE	About 3.7 kΩ
   CH (+)	About 1.7 kΩ
   CH (-)	About 775 Ω
   ↑ (VOL. UP)	About 357 Ω
   ↓ (VOL. DOWN)	About 100 Ω

4. If the resistance is not as specified, replace the audio remote switch (see STEERING WHEEL DISASSEMBLY/REASSEMBLY ).