LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Pilot EX, 3.5 4 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation System >> Navigation Display Unit Removal/Installation

Navigation Display Unit Removal/Installation

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the dashboard.
  1. Remove the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
  2. Remove the center upper panel (see CENTER UPPER PANEL REMOVAL/INSTALLATION ).
  3. Remove the screws and bolts, then pull out the navigation display unit (A).
    Fig 1: Identifying Navigation Display Unit & Connectors With Screws & Bolts
    G05967205Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Disconnect the connectors (B), and remove the navigation display unit.
  5. Separate the navigation display unit (A) and the tray (B).
    Fig 2: Identifying Navigation Display Unit & Tray
    G05967206Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the unit in the reverse order of removal. Be careful not to drop the forward bolt behind the dashboard.
scientia non olet · About LEMON Manuals