Rear Engine Mount Removal and Installation: Installation

Install the rear engine mount (A).

Fig 1: Rear Engine Mount & Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the jack and the wood block.
Tighten the rear engine mount bolt (A), then install the rear engine mount stop (B).

Fig 2: Rear Engine Mount Bolt, Rear Engine Mount Stop & Actuator Connector With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Connect the rear engine mount actuator connector (C).
Install the heat shield.

Fig 3: Identifying Heat Shield With Nuts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the rear WU-TWC (see WARM UP TWC REMOVAL/INSTALLATION ).