LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Pilot EX, 3.5 3 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Assembly >> Front Engine Mount Removal and Installation >> Removal

Front Engine Mount Removal and Installation: Removal

  1. Remove the radiator (see RADIATOR AND FAN REPLACEMENT ).
  2. Support the engine with a jack and a wood block under the engine/transmission.
  3. Disconnect the front engine mount actuator connector (A).
    Fig 1: Identifying Front Engine Mount Actuator Connector, Engine Mount Stop & Mount Bolt
    G05960876Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the front engine mount stop (B), then remove the front engine mount bolt (C).
  5. Remove the front engine mount (A).
    Fig 2: Identifying Front Engine Mount & Bolts
    G05960877Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals