Rear Controller and Screen Connector For Inputs and Outputs

Fig 1: Identifying Rear Controller & Screen Connector For Inputs & Outputs

Courtesy of AMERICAN HONDA MOTOR CO., INC.

WIRE COLOR REFERENCE TABLE

Cavity	Wire Color	Connect to
1	WHT	No. 23 (10 A) fuse in the under-hood fuse/relay box (+B)
3	BLK	Audio unit (GA-NET RR BUS+)
5	BRN	Audio unit (RR NTSC GND)
6	RED	Audio unit (HP R/LGND)
7	BRN(1)	Shield for terminals No. 6, No. 18, and No. 19 (HP R/L SH)
10	LT GRN	Audio unit (SCTY3)
11	LT BLU	No. 14 (7.5 A) fuse in the under-dash fuse/relay box (ILL+)
12	YEL	Audio unit (SYS ACC)
13	BRN(1)	Shield for terminals No. 3 and No. 14 (GA-NET RR BUS SH)
14	WHT	Audio unit (GA-NET RR BUS-)
16	YEL	Audio unit (RR NTSC)
17	BRN(1)	Shield for terminals No. 5 and No. 16 (RR NTSC SH)
18	WHT	Audio unit (HP L)
19	BLK	Audio unit (HP R)
22	RED	Navigation display unit (SCTY2)
23	YEL	Dash lights brightness controller
24	BLK	Body ground to G404 (GND)
(1) The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.