HFL Switch Test

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX and PRECAUTIONS AND PROCEDURES before doing repairs or service.

1. Remove the steering wheel (see STEERING WHEEL REMOVAL ).
2. Remove the HFL-voice control switch (see STEERING WHEEL DISASSEMBLY/REASSEMBLY )
3. Measure the resistance between terminals No. 3 and No. 4 in each switch position according to the table below.
   Fig 1: Identifying HFL Switch Connector Terminals

   Courtesy of AMERICAN HONDA MOTOR CO., INC.

   HFL Switch 

   HFL SWITCH TERMINALS REFERENCE TABLE
   
   

   Position	Resistance
   No buttons pressed	About 1 kΩ
   HFL TALK button pressed	About 185 Ω
   HFL BACK button pressed	About 45 Ω

4. If the resistance is not as specified, replace the HFL-voice control switch, (see STEERING WHEEL DISASSEMBLY/REASSEMBLY )