DTC B12E5
DTC B12E5 : Incorrect Assembly of Control Unit for Electric Steering Lock Equipped Vehicle
NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .
| DTC Description | DTC |
|---|---|
| B12E5 Incorrect Assembly of Control Unit for Electric Steering Lock Equipped Vehicle |
DTC (Power Control Unit)
- Problem verification
-1. Select model on the HDS screen.
-2. When prompted by the HDS, select YES when asked if the vehicle has keyless access system, then press and hold the engine start/stop switch button for at least 2 minutes. This selects the forced ON mode.
-3. Clear the DTCs with the HDS.
-4. Turn the vehicle to the OFF (LOCK) mode.
-5. Press the engine start/stop switch button.
-6. Select model on the HDS screen.
-7. When prompted by the HDS, select YES when asked if the vehicle has keyless access system, then press and hold the engine start/stop switch button for at least 2 minutes. This selects the forced ON mode.
-8. Check for DTCs with the HDS.
DTC Description DTC B12E5 Incorrect Assembly of Control Unit for Electric Steering Lock Equipped Vehicle Is DTC B12E5 indicated?
YES
Incorrect assembly of control unit for electric steering lock equipped vehicle. Replace it with the correct body control module (Keyless Access Control Unit) .
NO
Intermittent failure, the system is OK at this time. Check for loose or poor connections.