LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Insight Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Audio System >> System Description >> USB Adapter Unit Connector for Inputs and Outputs >> USB Adapter Unit Connector A (14P)

USB Adapter Unit Connector A (14P)

Fig 1: Identifying USB Adapter Unit A (14P) Connector Terminals
G06431794Courtesy of AMERICAN HONDA MOTOR CO., INC.
TERMINAL NAME REFERENCE CHART

Cavity Wire Color Terminal Name Connects to
A1 ORN + B Audio-navigation unit(2), Audio unit(3)
A2 BLU SYS ON Audio-navigation unit(2), Audio unit(3)
A3 GRY(1) GA-NET BUS SH Shield for terminals No. 9 and No. 10
A4 GRY(1) GAUDIO SH Shield for terminals No. 5, No. 6, No. 13 and No. 14
A5 BLK AUDIO R+ Audio-navigation unit(2). Audio unit(3)
A6 WHT AUDIO L+ Audio-navigation unit(2). Audio unit(3)
A9 YEL GA-NET BUS + Audio-navigation unit(2), Audio unit(3)
A10 BRN GA-NET BUS- Audio-navigation unit(2). Audio unit(3)
A11 BLK GND Audio-navigation unit(2), Audio unit(3)
A13 RED AUDIO R- Audio-navigation unit(2), Audio unit(3)
A14 GRN AUDIO L- Audio-navigation unit(2), Audio unit(3)
(1) The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.
(2) With navigation
(3) Without navigation
scientia non olet · About LEMON Manuals