Service Information
- The remaining engine oil life (A) is shown as a percentage on the information display. To see the current engine oil life, turn the ignition switch to ON (II), then push and release the Select/Reset button repeatedly until the engine oil life displays.
- When the ignition switch is in ON(II), and the remaining engine oil life (A) is 6% to 15%, the remaining engine oil life and other scheduled maintenance item(s) needing service are displayed. The maintenance minder indicator (B) also comes on when the engine oil life is 15% or less. To cancel the display and the indicator, press the Select/Reset button.
- Complete of maintenance main items (C) (see MAINTENANCE MAIN ITEMS ).
- Complete of maintenance sub items (C) (see MAINTENANCE SUB ITEMS ).
- When the ignition switch is ON (II), and the remaining engine oil life is 1% to 5%, the message "SERVICE" (A) is displayed along with engine oil life and the same maintenance item code(s).
- When the ignition switch is in ON (II), and the remaining engine oil life is 0%, the engine oil life (A) blinks.
Pressing the Select/Reset button cancels the display, but the maintenance minder indicator stays on.
- If the indicated maintenance is not done, the engine oil life indicator shows a negative mileage, for example "-10" on the display.
If the negative mileage is between 0 and -9, the indicator is displayed for only a few seconds when the ignition switch is turned to ON (II). The negative mileage (A) remains displayed after the vehicle is driven more than 10 miles (for USA models) or 10 km (for Canada models) after 0% oil life is reached, and the display cannot be cancelled. This means the indicated maintenance item(s) should have been done more than 10 miles (or 10 km) ago.