LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Civic GX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 79 (Entry Lights Control System (Hybrid)) >> Ignition Key Switch Test

Ignition Key Switch Test

WARNING: This page is about a different variant/trim than selected.
  1. Remove the steering column upper and lower covers (see COLUMN COVER REMOVAL AND INSTALLATION ).
  2. Disconnect the 6P connector.
    Fig 1: Identifying 6P Connector
    G05534417Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the No. 1 and No. 2 terminals.
    • There should be continuity with the key in the ignition switch.
    • There should be no continuity with the key removed.
  4. If the continuity is not as specified, replace the ignition switch.
scientia non olet · About LEMON Manuals