LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Civic GX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 60 (Immobilizer System (Hybrid)) >> Immobilizer-keyless Control Unit Replacement

Immobilizer-keyless Control Unit Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  2. Remove the steering column covers (see COLUMN COVER REMOVAL AND INSTALLATION ).
  3. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).
    Fig 1: Identifying Immobilizer-Keyless Control Unit & 7P Connector
    G05534536Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the two screws and the immobilizer-keyless control unit.
  5. Install the immobilizer-keyless control unit in the reverse order of removal.
  6. After replacement, register the immobilizer-keyless control unit (see IMMOBILIZER KEY REGISTRATION  ), and make sure the immobilizer system work properly.
  7. Program all of the customer's keys/keyless transmitters (see Immobilizer Key Registration ).
scientia non olet · About LEMON Manuals