LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Civic GX >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Heating/Air Conditioning) >> A/C Compressor Thermal Protector Replacement

A/C Compressor Thermal Protector Replacement

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, 2006 Honda S2000, and 2005 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt, the ground terminal (A), and the holder (B). Disconnect the field coil connector (C), then remove the thermal protector (D).
    Fig 1: Ground Terminal, Holder, Field Coil Connector And Thermal Protector With Torque Specifications
    G06232295Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Replace the thermal protector (A) with a new one, and apply silicone grease (P/N 08798-9028) (B) to the bottom of the thermal protector.
    Fig 2: Applying Silicone Grease To Bottom Of Thermal Protector
    G06232296Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the thermal protector in the reverse order of removal.
scientia non olet · About LEMON Manuals