LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Civic GX >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Conventional Brake Components) >> Brake System Inspection And Test >> Notes

Brake System Inspection And Test: Notes

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, 2006 Honda S2000, and 2005 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

Inspect The Brake System Components Listed. Repair Or Replace Any Parts That Are Leaking Or Damaged.

Component Inspections: 

Component Inspections

Component Procedure Also Check For
Master Cylinder Look For Damage Or Signs Of Fluid Leakage At:
  • Reservoir Or Master Cylinder Body.
  • Lines, Grommets, And Their Joints.
  • Between Master Cylinder And Booster.
 Bulging Seal At Reservoir Cap. This Is A Sign Of Fluid Contamination.
Brake Hoses Look For Damage Or Signs Of Fluid Leakage At:
  • Line Joints And Banjo Bolt Connections.
  • Hoses And Lines, Also Inspect For Twisting Or Damage.
 Bulging, Twisted, Or Bent Lines.
Caliper Look For Damage Or Signs Of Fluid Leakage At:
  • Piston Seal.
  • Banjo Bolt Connections.
  • Bleed Screw.
 Seized Or Sticking Caliper Pins.
Abs Or Vsa Modulator-Control Unit Look For Damage Or Signs Of Fluid Leakage At:
  • Line Joints.
  • Modulator-Control Unit.
  
scientia non olet · About LEMON Manuals