LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> Civic GX >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Lubrication System) >> Oil Pressure Switch Replacement

Oil Pressure Switch Replacement

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, 2006 Honda S2000, and 2005 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wire from the oil pressure switch, then remove the oil pressure switch.
    Fig 1: View Of Oil Pressure Switch With Torque Specifications
    G03692472Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove any old liquid gasket from the switch and switch mounting hole.
  3. Apply a very small amount of liquid gasket to the oil pressure switch threads, then install the oil pressure switch.
    NOTE: Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the new oil pressure switch.
scientia non olet · About LEMON Manuals