LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2011 >> CR-Z Base, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Head Restraint Trim Replacement

Head Restraint Trim Replacement

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the head restraint or the related parts.
  • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  1. Remove the head restraint (see step  7 ).
  2. Detach the hooks (A) of the head restraint trim (B) with a flat-tip screwdriver, then remove the trim from the head restraint (C).
    Fig 1: Detaching Hooks Of Head Restraint Trim With Flat-Tip Screwdriver
    G06953454Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Detach the hooks (A), then separate the head restraint trim (B) and the rear head restraint trim (C).
    Fig 2: Separating Head Restraint Trim And Rear Head Restraint Trim
    G06953455Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the trim in the reverse order of removal, and push the hooks into place securely.
scientia non olet · About LEMON Manuals