Hood Latch Replacement

Remove the front grille cover (see FRONT GRILLE COVER REPLACEMENT ).
Disconnect the hood latch switch connector (A), then detach the connector clip (B).

Fig 1: Hood Latch Switch Connector, Hood Latch, Connector Clip And Hood Opener Cable With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts, then remove the hood latch (C) from the body.
Disconnect the hood opener cable (D) from the hood latch. Take care not to bend or kink the cable.
Install the latch in the reverse order of removal, and note these items:
- Apply multipurpose grease to the hood latch as indicated by the arrows.
- Make sure the hood opener cable is connected properly and hood latch switch connector is plugged in properly.
- Make sure the cable actuates the latch before you close the hood.
- Adjust the hood latch alignment (see step 3 on HOOD ADJUSTMENT ).
- Make sure the hood opens properly and locks securely.
Fig 2: Identifying Multipurpose Grease Applying Area Of Hood Latch
Courtesy of AMERICAN HONDA MOTOR CO., INC.