Fuel Fill Pipe Removal/Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Drain the fuel tank (see FUEL TANK DRAINING ).
Remove the fuel fill cap.
Raise the vehicle on a lift.
Remove the left rear wheel.
Remove the rear inner fender (see FRONT FENDER ENCLOSURE REPLACEMENT ).
Disconnect the quick-connector fitting (A) and the fuel fill tube (B) from the fuel fill pipe (C). Slide back the clamp, then twist the hose as you pull to avoid damaging it.

Fig 1: Quick-Connector Fitting And Fuel Fill Tube With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the fuel fill pipe (C).
Install the parts in the reverse order of removal.