Immobilizer Code Is Not Identified
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
If the immobilizer code is not identified, the immobilizer indicator will quickly flash once, then will blink until the ignition switch is turned to LOCK (0). When the ignition switch is turned to LOCK (0), the indicator will blink ten times, then go OFF to show the system has correctly reset.
The state of the immobilizer key registration and the IMOCD (S-NET) line can be checked by doing a SYSTEM CHECK (see SYSTEM CHECK ), and STATUS LOG CHECK (see STATUS LOG ) with the HDS.