LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2010 >> Element SC, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Immobilizer System (V6)) >> Immobilizer Key Registration >> Programming Immobilizer-Keyless Control Unit

Programming Immobilizer-Keyless Control Unit

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
  1. Have all registered keys and the PCM code.
  2. Connect the HDS to the data link connector.
  3. Turn the ignition switch to ON (II).
  4. Select IMMOBI from the SYSTEM SELECTION MENU, then select IMMOBILIZER SETUP.
  5. Select REPLACE IMMOBILIZER RECEIVER/CONTROL UNIT.
  6. Do the registration according to the instructions on the HDS screen.
  7. Check that the engine can be started with all registered keys check that the door locks operate using the Immobilizer key transmitter.
  8. When prompted by the HDS, do the keyless transmitter programming.
  9. Make sure the keyless remote operation works properly.
scientia non olet · About LEMON Manuals