LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2010 >> CR-V EX, 2.4 RE3 >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> Knock Sensor Replacement

Knock Sensor Replacement

  1. Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the knock sensor connector (A).
    Fig 1: Lnock Sensor Connector And Knock Sensor With Torque Specification
    G06610411
  3. Remove the knock sensor (B).
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals