LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2010 >> CR-V EX, 2.4 RE3 >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> ECT Sensor 1 Replacement

ECT Sensor 1 Replacement

  1. Drain the engine coolant (see COOLANT CHECK ).
  2. Disconnect the ECT sensor 1 connector (A).
    Fig 1: ECT Sensor 1 Connector And ECT Sensor 1 With Torque Specification
    G06610409
  3. Remove ECT sensor 1 (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant (see COOLANT CHECK ).
scientia non olet · About LEMON Manuals