LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> S2000 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Fuel And Emissions Systems) >> How to Set Readiness Codes >> Evaporative Emission (EVAP) Control System Monitor and Readiness Code

Evaporative Emission (EVAP) Control System Monitor and Readiness Code

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Honda S2000, 2004 Honda S2000, 2003 Honda S2000, 2002 Honda S2000, and 2001 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • All readiness code are cleared when the battery is disconnected or when the ECM is cleared with an OBD II scan tool or the HDS.
  • The enable criteria must be repeated if the intake air temperature (IAT) drops lower then 36 °F (20 °C) from its value at engine start up.
scientia non olet · About LEMON Manuals