LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> Pilot Touring, 3.5 4 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Integrated Control System >> General Troubleshooting Information >> Using the HDS (Preferred method)

Using the HDS (Preferred method)

Connect the HDS to the Data Link Connector (DLC).

NOTE: There are two ways to read B-CAN codes with HDS.

First method; Go to TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A  to check for DTCs.

Second method; Ground the SCS circuit with the HDS, then read the DTCs displayed in the multi-information display in the gauge control module assembly, then go to TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A  .

scientia non olet · About LEMON Manuals