Symptom Troubleshooting Index
SYMPTOM TROUBLESHOOTING TABLE
| Symptom | Diagnostic procedure | Also check for |
|---|---|---|
| Azimuth (direction) information is not shown on the display | Do the input test (see ELECTRICAL COMPASS UNIT INPUT TEST ) | Check that the electrical compass unit is properly connected. |
| Self-test has failed (flashing the CAL and NW) | Do the input test (see ELECTRICAL COMPASS UNIT INPUT TEST ) | |
| Compass shows wrong direction | Do the compass zone selection and calibration (see ELECTRICAL COMPASS ZONE SELECTION AND CALIBRATION ) | Check if the zone setting is correct for the vehicle geographical location. |